Decor Stone products can be adhered to any solid masonry block or brick surfaces, cement sheet (not Blue Board) or concrete surfaces. If in doubt ring our office for clarification.

The adhesive recommended for Decor Stone products is Mapei Kerabond Plus mixed with the latex additive Isolastic. Mapei and Laticrete are the only two companies who will warrant their products when used with our Decor Stone “Ledge Stone” product due to its 80kg (approx.) weight per m².

Water can be used as an additive instead of the Isolastic product when used in flooring applications. Isolastic “Pure” should be used in all Ledge Stone applications and when the wall height to be covered exceeds one metre.

Due to the uncertainly as to the quality and strength of a cement rendered finish, it is our recommendation to remove this by grinding prior to installing a selected Decor Stone cladding – better to be sure than sorry

No as you are only adhering to the paper covering. This is not a suitable surface.

Decor Stone products are only made of natural stone and are best left unsealed to show their natural appearance. Due to the occasional presence of small particles of iron in 2 Stacked Stone colours (Onyx and Russet) sealing is recommend of these 2 colours.